Новий, високочастотний датчик руху (не PIR motion sensor, а саме радіочастотний датчик з напрямленою антеною всередині) в комбінації з датчиком освітлення, з регуляторами чутливості та часу роботи. Великий діапазон регулювання, розміри менші ніж в аналогів, чутливість вища ніж в аналогів, датчик освітлення винесено на пеедню чкстину для більшої чутливості. Повний комплект: сам датчик, його кришка, кріплення, інструкція.

Більше деталей в описі:
5.8G Round Microwave Radar Sensor Switch AC85-250V Delay Dystem Sensor Microwave Radar Switch Motion Detector Light Switch

''Features
1: Wide range of applications
2: Simple to use
3: Sensitive
4: Fully automatic induction
5: Safe and power saving, free from external influences such as sound and objects.

A product overview:
When someone walks into the sensor and meets the lighting requirement, the microwave switch is automatically turned on, the load electrical appliance starts to work, and the delay system is activated. As long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the induction area, the sensor starts to calculate the delay, and when the delay ends, the sensor switch is automatically turned off, and the load electrical appliance stops working. Truly, safe, convenient and intelligent, energy saving.
Two product features:
1. The induction is sensitive, and the movement of living and non-living bodies can be accurately identified, so that the error rate is minimized.
2. Strong anti-interference: using 5.8GHz operating frequency, it is less affected by external natural factors, and the performance is stable and reliable.
3. Automatic metering: Automatically identify the intensity of ambient light, meet the lighting requirements and light up when there are people. Otherwise it does not light up.
4. Fully automatic induction: automatically turn on the lights after sensing people, turn on the lights when people come, and turn off the lights when people leave, safe and power-saving, free from external influences such as sound and objects.
Three technical parameters:
Working voltage: AC85-250V
Standby power consumption: 0.07W
Transmit power: 10mA
Operating frequency: 5.8GHz
Induction distance: 2-16 meters (adjustable)
Working delay: adjustable from 8 seconds to 12 minutes
Light control illumination: 2-200LUX adjustable
Load power: 800W (resistive load) 200W (capacitive load)
Four notes:
1. Please disconnect the power supply before installation to avoid danger
2. The product is not waterproof, please pay attention to moisture-proof and waterproof.
3. The microwave induction angle is 360 degrees, please pay attention to the installation method.
4. There is high voltage inside the product, non-professionals are not allowed to disassemble it.
Package included:
1*5.8G microwave radar sensor switch''